Product designation				Automatic transfer switch controller for 2 power sources, three phase control, with LCD display, 12-24VDC supply
Product type designation				ATL601
General characteristics
Number of controlled power sources			Nr.	2
Display				Backlit LCD graphic display 128x80 pixel
Languages			Nr.	5
Expandability				No
DC Power supply
Rated supply voltage DC			VDC	12-24
Operating supply voltage range DC			VDC	7.5...33
Current consumption Max			mA	230mA at 12VDC, 120mA at 24VDC
Maximum power consumption / dissipation			W	2.9
Voltage inputs
Maximum rated voltage Ue				100...480VAC L-L (277VAC L-N)
Measurement range			V	50...576VAC L-L (333VAC L-N)
Frequency range			Hz	45…65
Measurement method				True root mean square (TRMS)
Input impedance
		phase-phase	kΩ	>1.0MΩ
		phase-neutral	kΩ	>0.5MΩ
Measuring accurancy				±0.25% f.s. ±1 digit
Wiring mode				Single-phase, two-phase, three-phase line with or without neutral and balanced three-phase system
Digital inputs
Number of digital input			Nr.	6
Type of digital input				Negative
Digital current inputs			mA	<8
Low input signal			VDC	≤2.2
High input signal			VDC	≥3.4
Input signal delay			ms	≥50
Relay outputs
Number of relay output			Nr.	7
Contact arrangement				6 x 1NO-SPST + 1 x C/O-SPDT
Electrical life			cycles	10⁵
Mechanical life			cycles	10⁷
Interface
Front optical USB communication port				Yes, with CX01 USB dongle (optional)
Front optical Wi-Fi communication port				Yes, with CX02 Wi-Fi dongle (optional)
Functions
Programmable source type				Single-phase, two-phase, three-phase with or without neutral
User alarms				Yes
Limits				Yes
Event logging				100
Ambient conditions
Temperature
	Operating temperature
		min	°C	-30
		max	°C	+70
	Storage temperature
		min	°C	-30
		max	°C	+80
Relative humidity			%	<80%
Maximum Pollution degree				2
Overvoltage category				3
Measurement category				III
Climatic sequence				Z/ABDM (IEC/EN 60068-2-61)
Shock resistance				15g (IEC/EN 60068-2-27)
Vibration resistance				0.7g (IEC/EN 60068-2-6)
Housing
Execution				Flush mount
Material				Polycarbonate
Mounting				Flush mount - panel cut-out 138x138 mm
Degree of protection				IP40 on front, IP65 with optional gasket code EXP8001, IP20 on terminals
Dimensions (W x H x D)			mm	144 x 144 x 52.2mm
Weight			g	600
ETIM classification
ETIM 8.0				EC000236 - PLC CPU-module

Documents

27 - Automatic transfer switch controllers (eng)

Automatic transfer switch controllers ATL series (eng)
PD107GB04_21

Automatic transfer switch controllers. ATL600, ATL601, ATL610. Instructions manual (eng)
I414GB09_20
Automatic transfer switch controllers ATL600, ATL601, ATL610. Quick installation manual (eng)
I415IGB09_20
Automatic transfer switch controller - Communication protocol Modbus ATL610 (eng)
I428IGB09_22

FAQ for ATL6..., ATL800, ATL900 automatic transfer switch controllers (eng)
F066IGB11_21

Automatic transfer switch controllers ATL series | Tutorial

Certifications

cULus
EAC

Conformity

IEC/EN 60947-1
IEC/EN 60947-6-1
IEC/EN 61000-6-2
IEC/EN 61000-6-3

Products > Automatic transfer switch controllers

ATL601

Compare

Automatic transfer switch controller with optical port for 2 power sources (144X144mm/5.7X5.7”), power supply 12...24VDC

Type of product: Automatic transfer switch controllers
N° of controlled power sources: 2
Voltage inputs per line: Three-phase
Rated supply voltage: 12-24VDC

Order code	ATL601
Weight [g]	680
Qty. per package	1
Multiple qty. of packs per order	1
Package dimensions [mm]	185X176X084
Volume [cm³]	2735.04
Bar code [EAN13]	8013975239568
HS Code	85389091